HAVING AN ISSUE WITH BROKEN/SHATTERED CHAMBER REAMER?

That problem can be caused by inadequate evacuation of the chips, inadequate cutting oil or inappropriate utilization of the chamber reamer.

HAVING AN ISSUE WITH BROKEN/SHATTERED CHAMBER REAMER?

That problem can be caused by inadequate evacuation of the chips, inadequate cutting oil or inappropriate utilization of the chamber reamer.

* Successfull use of chamber reamer require basic levels of machining knowledge

We recommend:
- to use reamer on tool room lathe

- surface speed: 150-300RPM

- feed rate: .004 to .006 per revolution

- for holding the reamer, use floating reamer holder

- to use adequate cutting oil lubricant 

- to prevent the damage, after finishing the job, store reamer in safe manner

Educational video for chambering:

Barrel chambering - First step rougher second step finisher chamber reamer

Express delivery

Call us

Send us an email

Please know that cookies are required to operate and enhance our services as well as for advertising purposes. We value your privacy. If you are not comfortable with us using this information, please review your settings before continuing your visit.
  • Mandatory
  • Permanent
  • Statistics
  • Marketing