That problem can be caused by inadequate evacuation of the chips, inadequate cutting oil or inappropriate utilization of the chamber reamer.
That problem can be caused by inadequate evacuation of the chips, inadequate cutting oil or inappropriate utilization of the chamber reamer.
* Successfull use of chamber reamer require basic levels of machining knowledge
We recommend:
- to use reamer on tool room lathe
- surface speed: 150-300RPM
- feed rate: .004 to .006 per revolution
- for holding the reamer, use floating reamer holder
- to use adequate cutting oil lubricant
- to prevent the damage, after finishing the job, store reamer in safe manner
Educational video for chambering:
Barrel chambering - First step rougher second step finisher chamber reamer
